FAQ
Where can I get a my Ditch Witch Mini Stand On Skid Loader repair done? Gap Power in Gap, PA 17527
Who has parts in stock for Ditch Witch SK800 stand on mini track loader? Gap Power does.
Who fixes Dingo loaders? Gap Power does. Dingo is a generic term used for track drive stand on mini loaders.
Where is Gap Power's repair shop for Ditch Witch Mini Stand on loaders located? 795 RT 41 Gap, PA 17527
Can I buy parts and do the repairs myself? Yes. Craig may have a few tips for you in fixing your mini track skid loader.
See stock inventory of stand on mini loader parts at bottom of this page. For the most personal service call Craig 717.779.1446 mobile.
How soon can a Ditch Witch stand on loader be repaired at Gap Power. It varies, but we try hard for 2 day service turnaround.
We have over 125 parts such as drive motors, pump mounts, roller spindles, track drive motors, ignition switches, fuel caps, cylinders, radiator cap, throttle cable, tank gasket, solenoid valve, bearings, bushing, tapered spindle, oil seals, composite bushing, bolts, nuts and hundreds of other parts for the Ditch Witch mini loader SK800, SK600, SK650, SK750, SK900, SK1050, SK1550, SK1750 and more.
Are Ditch Witch Dingo parts expensive? They are average in cost for the most part. Sometimes we can substitute but usually there is no need to.
Ditch Witch stand on loader filter and maintenance kits are especially well priced.
We rent SK800 Ditch Witch, SK1550 and SK1750. Because we have so many in our rental fleet, and because of all the used Ditch Witch SK800 we have sold, we have built up a reputation for good repair work and personal service via a direct line to our Lead Tech, Craig Stoltzfoos.
We Do Minor Repairs & Major Repairs On Ditch Witch, Bobcat MT100 and Wacker Neuson SML60, SML100 and SML120.
| Id |
Description |
| 116-108 |
BULK HOSE (5/16") Per Inch |
| 118-096 |
BULK FUEL TUBING 1/4" (PER INCH) |
| 105-054 |
LUG NUT (7/16-NF) |
| 106-164 |
FLG LK SCREW (M10-1.50 X 30MM) |
| 184-064 |
TAPERED INSERT (2") |
| 105-114 |
LUG NUT (1/2-NF) |
| 107-287 |
CLIP NUT (M10-1.50) |
| 110-416 |
PLUG (1-1/8") |
| 116-325 |
GROMMET (.362") |
| 105-031 |
BOLT (3/8-NC X 1") |
| 105-2584 |
Lug Bolt |
| 105-2949 |
1/2-20 NF LUG BOLT |
| 106-383 |
FLG LK SCREW (M10-1.50 X 30MM) |
| 107-048 |
Lug Nut Stud |
| 105-1749 |
OIL SEAL (1.500 X 2.328 X .631) W SHIELD |
| 105-2695 |
RUBBER BUMPER (M6) |
| 105-2745 |
FLG LK BOLT (3/8-NC X 1/2" GR
5) |
| 108-074 |
CAPSCREW (M10-1.50 X 25MM SOC) |
| 125-1224 |
COMPOSITION BUSHING (1.375"X1.75"X2.00") |
| 157-041 |
O-RING (152 D70) |
| 105-089 |
LOCKNUT (5/16-NC) |
| 105-117 |
WASHER (5/16") |
| 105-1272 |
CAM WASHER (M10 21.0MM O.D.) |
| 105-1790 |
Key |
| 105-1979 |
BOLT (M8-1.25 X 16MM BUT SOC) |
| 105-824 |
FLG LK BOLT (5/16-NC X 1.75") |
| 106-327 |
SCREW (M8-1.25 X 30MM) |
| 106-381 |
FLG LK SCREW (M8-1.25 X 25MM) |
| 106-387 |
FLG LOCKNUT (M10-1.50) |
| 106-724 |
FLG SCREW (M10-1.50 X 25MM) |
| 106-767 |
SCREW (M8-1.25 X 20mm BUT SOC) |
| 107-096 |
LOCKNUT (M8-1.25 NLK) |
| 110-655 |
BALL SCREW (5/16-NC X 1/2") |
| 111-146 |
BOLT ON CLAMP (5/8" X 5/8" SET) |
| 157-099 |
O-Ring |
| 302-9703 |
ULTRACOMP BUSHING (1.25") |
| 323-551 |
WELD PLATE (SP2D) |
| 105-1098 |
BOLT (M10-1.50 X 30MM BUT SOC) |
| 105-1547 |
JAM NUT (3/8-NC) |
| 105-162 |
BOLT (3/8-NC X 2-1/4") |
| 105-2183 |
KNOB (1/2" NC STEEL INSERT) |
| 105-2224 |
UHMW WASHER (1.25 ID) |
| 105-2243 |
NYLON WASHER (5/8") |
| 105-2424 |
SNAP RING (1.375") |
| 105-286 |
BOLT (3/8-NC X 1-3/4") |
| 105-416 |
WASHER (5/8") |
| 105-418 |
Motor Nut |
| 105-510 |
Roll Pin |
| 105-829 |
Flange Bolt |
| 106-345 |
SCREW (M20-2.50 X 50MM) |
| 106-399 |
WASHER (M20 HARDENED) |
| 106-469 |
Bolt |
| 106-470 |
FLG Screw |
| 106-611 |
SCREW (M20-2.50 X 40MM 10.9) |
| 106-709 |
FLG LK NUT (M12-1.75) |
| 106-755 |
SCREW (M10-1.50 X 30MM, SOC) |
| 107-043 |
SHLD BLT (M12 X 35MM M10-1.50) |
| 107-483 |
Shoulder Bolt |
| 107-582 |
SHLD BOLT(3/8" X 1/4" 5/16-NC) |
| 110-833 |
SNAPPER PIN (3/8" X 2-3/4") |
| 118-424 |
Comp Spring |
| 125-1000 |
COMPOSITION BUSHING (1.25") |
| 125-1058 |
TAPERED BEARING SET (1.250") |
| 140-1227 |
SPROCKET 11T 72MM PITCH Superseeded to 140-1489 |
| 140-1489 |
SPROCKET 11T 72MM PITCH |
| 150-4313 |
Test Coupling |
| 150-4328 |
Guage Adapter |
| 160-1300 |
FORGED TRACK ROLLER |
| 177-045 |
SPACER |
| 177-1092 |
TAPERED PIN (1.375" X 4.437"
W/ GROOVE) |
| 179-104 |
Tapered Pin |
| 179-907 |
Tapered Pin |
| 179-908 |
Tapered Pin |
| 181-974 |
Tapered Insert |
| 190-2196 |
Uptime Kit (SK850, SK1050, SK1550) |
| 194-881 |
OIL FILTER |
| 195-1822 |
FAN BELT |
| 205-1214 |
DUST CAP W/ CREASE (2.323") |
| 300-5003 |
LOCK PIN |
| 301-0343 |
MUFFLER BRACKET |
| 302-2825 |
ATTACHMENT LEVER |
| 302-3045 |
BENT TAB |
| 302-3046 |
BENT TAB |
| 302-6127 |
SPACER |
| 303-2299 |
DUST CAP RETAINER |
| 306-607 |
HORN BUTTON |
| 362-1163 |
LATCH |
| 362-1942 |
GRIP (.75 X 4.5) |
| 500-2348 |
ENGINE OIL FILTER (Yanmar) |
| 105-003 |
FLG LOCKNUT (5/16-NC) |
| 105-053 |
NUT (3/8 NC) HEX |
| 105-1078 |
Strut |
| 105-188 |
LOCKNUT (7/16-NF) |
| 105-2158 |
STRUT (120 LB) |
| 105-2425 |
WASHER (1.375") |
| 105-969 |
Bolt |
| 106-338 |
SCREW (M16-2.00 X 30MM) |
| 106-386 |
FLG LOCKNUT (M8-1.25) |
| 106-397 |
WASHER (M12 HARDENED) |
| 106-517 |
BOLT (5/16-NC X 1.375") |
| 106-535 |
SHLD BLT (M12 X 30MM M10-1.50) |
| 106-632 |
FLG LK SCR (M12-1.75X35MM SER) |
| 110-530 |
HANDLE (1/2-NC GREEN) |
| 110-898 |
RADIATOR CAP (14 PSI) |
| 111-064 |
Knob |
| 117-558 |
Latch |
| 121-040 |
SIGHT GLASS |
| 125-1094 |
COMPOSITION BUSHING (1.25") |
| 125-538 |
Bushing |
| 149-326 |
GASKET MUFFLER |
| 150-2510 |
BREATHER CAP 3 PSI |
| 150-3702 |
1/2" Male Coupling |
| 150-4129 |
CYL (2.5 X 1.25 X 10.0) |
| 153-298 |
HOSE (04OFX90L-42"-3000) ******NLA Call to confirm |
| 153-607 |
Hydraulic Tank Gasket |
| 154-265 |
UNION RUN TEE (04OFX-04O-04O) |
| 155-572 |
Hydraulic Motor |
| 158-627 |
Valve Solenoid |
| 184-065 |
Tapered insert |
| 194-761 |
DISCHARGE VALVE |
| 195-1069 |
Throttle Cable |
| 213-338 |
Temperature Switch |
| 215-127 |
Fuel Level Guage |
| 215-1597 |
Park Brake Switch |
| 215-2013 |
Ignition Switch |
| 215-2594 |
Hour Meter |
| 270-6871 |
GRAY LOGOTYPE 18.5” X 3.25” |
| 301-7650 |
Strut Stop |
| 302-6126 |
Tapered spindle |
| 303-2042 |
PUMP MOUNT |
| 303-3333 |
LIFT STOP |
| 306-608 |
BUTTON COVER |
| 362-1133 |
Knob |
| 362-1135 |
KNOB |
| 362-1148 |
BOOT |
| 362-1892 |
Diesel Cap |
| 364-1009 |
FUEL TANK, 10.5 GAL |
| 364-1011 |
Hydraulic Tank |
| 500-2983 |
BELT (YANMAR) |
| 500-3573 |
Float Kit |