(717) 442-8970

/Inventory/Equipment & Tool Rental 1,000 + Items. Online Rates/Roofing Machines & Tools
Showing 1 - 12 of 1612Next >
Equipter Roofer's Buggy 4,000 lbs. capacity
Equipter Roofer's Buggy 4,000 lbs. capacity
Tear off shingle roofs with no mess. The Roofer's buggy is a self propelled roofing trailer for easy access into yards and has a lift to get materials to the roof and to collect roof debris.
NOTE: An electronic brake controller is needed.
ROOFBUG
Details...
Rent a Foam Roof Scarfer/Scarifier
Rent a Foam Roof Scarfer/Scarifier
***There is an extended lead time to rent this unit. Please reserve at least 3 weeks ahead of time****

Scarify a foam room coating quickly by removing the sprayed on roof foam and prep for a new coating with the rental foam roof scarifier
ROOFSCA
Details...
Rent a Roof Tear off Machine
Rent a Roof Tear off Machine
For fast removal of roof coatings like rubber on flat or low slope roofs and decking, use the Gator Roof Tear off machine.

With a pivoting, elliptical motion head, the Gator Eraser roof ripper efficiently removes roof coatings while keeping the entire blade in constant contact with the roof surface. Sometimes referred to as a roof scraper or roofing remover.

ROOFTEAR
Details...
Rent Automatic Hot Air Roof Welder Heat Seam Tool
Rent Automatic Hot Air Roof Welder Heat Seam Tool
Easy to handle and user friendly due to optimal design and balance. Work even more efficiently with the BAK LarOn 21 (Leister Varimat V2 or Leister Varimat 700), the fastest automatic welding machine in the market. You choose your optimum welding speed anywhere between 2 to 68 ft/min. Sometimes referred to as a TPO welder.
ROOFWELD
Details...
Rent the Shingle Hog
Rent the Shingle Hog
Rent the Shingle Hog to remove old shingles. It can remove one, two, or three layer roofs and keep you standing upright while you use it. Sometimes referred to as a roof shingle remover.
SHIHOG
Details...
New!
Roof Standing Seam Eave Bending and Eave Locking Tool Kit
Roof Standing Seam Eave Bending and Eave Locking Tool Kit
Standing Seam metal roof eave bending and crimping is done with two tools, the Eaves Edger Folder and then the Eaves Seam Locker/Crimper
RAU 105 Eaves Edger
Spring loaded leveraged action grips material for starting the panels bend around a drip edge
Jaw Width: 9-3/4"
RAU 106 Eaves Locker
Used for locking the panel onto the drip edge after the bend has been started with the RAU 105 Edger
Crimps the panel for a tight lock and desirable finish
Jaw Width: 8-1/2"
ROOFBEND
Details...
Shingle Lift, Electric
Shingle Lift, Electric
The Safety Hoist Electric EH500 runs on a 120V power source and has built in brake to keep the unit from dropping, even if power is disconnected.
LIFSHI
Details...
Showing 1 - 12 of 1612Next >
Back to Top
0