Toro Stump Grinder, 38 HP, Hydraulic Cutter Swing

Delivery from $74.00 · if machine is available

Delivery + pickup included. Equipment, capacity and timing confirmed at booking.

Delivery rules & ratesNeed it sooner? Give us a call

Toro Stump Grinder, 38 HP, Hydraulic Cutter Swing

STUM

Rental Item Details

Medium Stump Grinder 38HP 21" Wheel	Model STX38 Toro
Weight	1,750 lbs.
L W H	95" 34" 51"
Swing Arc	52"
Cut Depth	18"
Cut Height	35"
DELIVERY ESTIMATE	GET RATE

Manuals

Spec Sheet Bandit 2150 Stump Grinder

Operators Manual Bandit 2150 Stump Grinder

Spec Sheet Bandit 2550XP Stump Grinder

Operators Manual Bandit 2550XP Stump Grinder

Toro STX-38 Operator Manual

Toro STX-38 Spec Sheet

Toro STX-38 Parts List

Bandit Model 2150 XP or Toro STX-38 (stx38) is an ideal machine for tree services, municipalities, looking for a dependable, self-propelled grinder with the ultimate maneuverability. Estimated Grinding Speed: 30" green softwood stump from 4" above to 8" below in 45 minutes

These rugged models are extremely productive due to massive 50-inch swing arcs, one of the largest available in this size range.

Tight steering radius add stability and maneuverability for a wide variety of terrain conditions making it a

favorite among tree service and land clearing companies large or small! Also known as a stump remover or stomp grinder or stump shredder or stompgrinder or stumpgrinder or root grinder or tree grinder.

FAQ

When should I choose the Toro STX-38 38 HP stump grinder over a smaller walk-behind model?

This machine is commonly used for: grinding large hardwood or softwood stumps; clearing multiple stumps in a single day; working on sloped or uneven terrain; and accessing backyards through standard 36-inch pedestrian gates. It shines because it combines a powerful 38 HP engine and a massive 52-inch hydraulic swing arc with a compact 34-inch width, allowing you to tackle large-scale tree removal jobs without needing a massive tow-behind unit. If you only have one or two small, soft stumps under 12 inches, a smaller walk-behind model may be more cost-effective.

How do I transport this 1,750 lb. stump grinder, and will it fit on a standard utility trailer?

Weighing 1,750 lbs. with dimensions of 95" L x 34" W x 51" H, this unit requires a heavy-duty utility trailer with a ramp and a properly rated towing vehicle. Do not attempt to haul it in the bed of a pickup truck. Ensure your trailer's payload capacity can safely handle the weight, and secure the machine using heavy-duty tie-down straps or chains. If you do not have a trailer, you can rent a <a href="https://www.gappower.com/products/rent-utility-equipment-trailer-2100-lb-capacity-tra3000"> Utility Equipment Trailer, 2100 lb Capacity</a> and use the complimentary "preload" service. Simply ask for the equipment to be preloaded onto your Gap Power rental trailer when making your reservation and the equipment will be preloaded when you arrive.

Will this stump grinder fit through a standard backyard gate?

Yes, with a width of only 34 inches, this machine is specifically designed to pass through standard 36-inch backyard gates. This allows you to bring 38 HP of grinding power into tight residential yards without removing fence panels, though you should ensure the path is clear of tight turns or steep side-slopes.

What are the maximum grinding depth and height limits for this machine?

The Toro STX-38 can grind up to 18 inches below grade (cut depth) and up to 35 inches above grade (cut height). This deep reach is ideal for completely removing root systems to prevent regrowth and allow for immediate replanting or sod installation.

How fast can I expect to grind a typical tree stump with this 38 HP unit?

Grinding speed depends on wood hardness and root structure, but as a benchmark, this machine can grind a 30-inch green softwood stump from 4 inches above ground to 8 inches below ground in approximately 45 minutes. Hardwoods like oak or hickory will take longer, while smaller stumps can be cleared in minutes.