This Tomahawk Early Entry saw rental is used for cutting expansion joints into new concrete, the same day the concrete was poured.
***Blade is Included with Rental***
This saw works in conjunction with Soff-Cut blades and patented skid plates to allow for ultra early entry cutting, which minimizes chipping and spalling, while getting the job done the same day. Sometimes referrred to as chop saw, wet saw, wet concrete saw, cut off saw or cutoff saw soft cut saw, soft kut saw
FAQ
Can I operate this early-entry saw indoors?+
Because this unit is powered by a 3.5 hp gasoline engine, it produces toxic carbon monoxide exhaust and should never be run in enclosed, occupied, or poorly ventilated indoor spaces. For indoor pours, ensure high-volume cross-ventilation, open all overhead doors and windows, or consider the Battery Early Entry Soff Cut (Soft Cut) Saw.
When should I choose an early-entry concrete saw instead of a standard walk-behind saw?+
This is commonly used for: cutting expansion joints into green concrete the same day it is poured; preventing random stress cracking in fresh slabs; cutting residential driveways and sidewalks without edge chipping; joint relief in pole barns and garage floors. An early-entry saw shines because its specialized blade and skid-plate system cut while the concrete is still soft (within hours of finishing), before internal stress cracks can develop. For cured, hardened concrete older than 24 to 48 hours, or for deeper structural cuts beyond 1-3/16 inches, choose a standard walk-behind wet saw instead.
How do I know when the concrete is ready to cut with this early-entry saw?+
Cutting should begin as soon as the concrete can support the weight of the saw and the operator without leaving footprints or tire ruts—typically within 1 to 4 hours after final finishing, depending on weather and mix design. If the blade tears the joint, pulls aggregate loose, or causes severe edge spalling, the slab is too wet and you should wait 15 to 30 minutes before trying again. If you wait too long (such as the next day), stress cracks may have already formed beneath the surface.
What is the maximum cutting depth of this Tomahawk early-entry saw?+
The saw uses a 6-inch early-entry blade to deliver a maximum cutting depth of 1-3/16 inches. This depth is specifically intended for control joints in slabs up to roughly 4 to 5 inches thick, satisfying the standard engineering guideline of cutting at least one-fourth of the slab thickness. If your slab requires deeper relief cuts or you are cutting completely through thicker concrete, a larger commercial walk-behind saw is required.
Is the cutting blade included with the rental?+
Yes, the blade rental is included in the rental price for this unit. The saw must be run with compatible early-entry blades and its matching skid plate to prevent chipping and raveling along the cut joint edges.
What common mistakes can damage the finished cut or the saw blade?+
The most common mistakes are forcing or twisting the saw along the line and cutting while the concrete is still too soft. Let the blade cut at its own pace without leaning heavily into the handle, and always follow a straight chalk line to avoid binding or twisting the blade, which can gouge the fresh surface and ruin the cut.
How can I transport this 87 lb saw to my jobsite?+
At 87 lbs, the Tomahawk TFS6H is compact enough to be lifted into a pickup truck bed, SUV cargo area, or utility trailer by two people. The handles can be folded or adjusted to fit in tight vehicle spaces, and the unit must be strapped securely upright to prevent engine oil and fuel spills during transport. Gap Power also offers deilvery directly to our jobsite upon request.