Skip to content

69075 NAIL ROOFING HDG 1-1/4 IN 5LB

SKU 692-1282
Sold out
Original price $25.00 - Original price $25.00
Original price $25.00
$25.00
$25.00 - $25.00
Current price $25.00
In-Store Availability
Stock Status: Limited Stock (1-2?) Location: Not Specified
In-Store Only — Visit us in Gap, PA to purchase

Overview

The PRO-FIT Roofing Nail (69075) is designed for hand-drive roofing fastening applications requiring a hot-dip galvanized steel nail with consistent dimensional and material specifications.

Specification Value
MPN 69075
Brand / Manufacturer PRO-FIT / National Nail Corp
Nail Length 1-1/4 in
Head Diameter 7/16 in
Head Type Flat
Shank Type Round, Smooth
Point Type Diamond
Material Gauge 11 ga
Material / Finish Steel, Hot-Dip Galvanized (HDG)
Approximate Count per Pound 196 nails
Package Weight 5 lb
Category Hardware Fasteners > Nails

Technical Features

  • Hot-Dip Galvanized (HDG) Steel Construction: Provides corrosion resistance suited to exterior and roofing environments where moisture exposure is a consistent factor.
  • Flat Head at 7/16 in Diameter: Wide bearing surface distributes clamping force across roofing material, reducing the risk of pull-through on shingles and underlayment.
  • 11-Gauge Shank: Heavier wire gauge delivers increased shank strength and withdrawal resistance compared to lighter-gauge alternatives.
  • Diamond Point Tip: Tapered geometry allows for consistent material penetration during hand-drive installation, minimizing splitting.
  • Smooth Round Shank: Facilitates clean, controlled hand-drive installation with standard roofing hammers.
  • 196 Nails per Pound / 5 lb Package: Yields approximately 980 nails per package, supporting efficient staging and estimating on roofing projects.

Applications

  • Hand-nailing asphalt and fiberglass roofing shingles to roof decking.
  • Fastening roofing underlayment and felt paper where a wide flat head is required.
  • General roofing repair and replacement tasks requiring a hot-dip galvanized fastener for outdoor exposure conditions.
  • Suitable for use in applications where code or manufacturer specifications call for an 11-gauge, HDG, flat-head roofing nail at 1-1/4 in length.
More in Collated Nails & Staples View all 178 →
1-1/2 x 148 PSLD Nail Galv ACQ Jst Hngr 3000 PASLODE1-1/2 x 148 PSLD Nail Galv ACQ Jst Hngr 3000 PASLODE $111.00 primary_image2-3/8" x .113 HOT DIPPED GALVANIZED RING SHANK 30 DEGREE PAPER TAPE COLLATED ROUNDRIVE FRAMING NAILS 2000CT $60.00 Enviromat Pins, 17686 Sod Staples/Pins, 6X1X6 (0)Enviromat Pins, 17686 Sod Staples/Pins, 6X1X6 $8.94 primary_imageSimpson Strong-Tie S13A225SNC 15° Wire Coil, Full Round Head, Ring-Shank Siding Nail — 2-1/4 in. Type 304 (3600-Qty) $163.00 3 1/4 x 131 Nail RS Galv ACQ 2,0003 1/4 x 131 Nail RS Galv ACQ 2,000 $120.00 primary_imageSimpson Strong-Tie S13A175SNC 15° Wire Coil, Full Round Head, Ring-Shank Siding Nail — 1-3/4 in. Type 304 (3600-Qty) $134.00 3 x 131 Nail SM Galv ACQ 2,000 Round Drive3 x 131 Nail SM Galv ACQ 2,000 Round Drive $100.00 1-3/4" EG ROOFING NAIL25# 1321191-3/4" EG ROOFING NAIL25# 132119 $38.00 Staple  1/2"Med Crown,1-1/2",16Ga,GAL 105M PASLODEStaple 1/2"Med Crown,1-1/2",16Ga,GAL 105M PASLODE $92.00 1-1/2" x 7/16  Crown Staple EG 10000/Box1-1/2" x 7/16 Crown Staple EG 10000/Box $56.00 primary_imageDEWALT Finish Nails, 2-1/2-Inch, 16Ga, 20-Degree, 2500-Pack $33.00 primary_imageDEWALT Finish Nails, 20-Degree, 2-Inch, 16Ga, 2500-Pack $30.00 1-1/2 x 148 Nail Brite Joist hange 3000 Paslode1-1/2 x 148 Nail Brite Joist hange 3000 Paslode $77.00 2 3/8 x 113 Ring Shank Nail Brite 5,000 PneuFast2 3/8 x 113 Ring Shank Nail Brite 5,000 PneuFast $70.00 primary_imageSimpson Strong-Tie S16N250FNJ Straight, Adhesive Collation, T-Style Head, 16-Gauge Finishing Nail — 2-1/2 in. Type 304 (2500-Qty) $93.00 primary_imageSimpson Strong-Tie S16N200FNJ Straight, Adhesive Collation, T-Style Head, 16-Gauge Finishing Nail — 2 in. Type 304 (2500-Qty) $76.00 Staple PASLODE 1/2" Med Crown,1-3/4", 16Ga, GAL 9MStaple PASLODE 1/2" Med Crown,1-3/4", 16Ga, GAL 9M $91.00 2" x 18ga Brads Electro Gal 5000/Box2" x 18ga Brads Electro Gal 5000/Box $12.00 primary_imageDEWALT 2-1/2 in. 16 Gauge Straight Finish Nail (2,500 PK) $17.00 primary_imageSimpson Strong-Tie S15N200SFN Tape Collation, DA-Style Angle, 15-Gauge Finishing Nail — 2 in. Type 304 (4000-Qty) $182.00
Document