Skip to content

2-1/2 EG ROOFING NAIL 12/1#

SKU 132158
Original price $5.00 - Original price $5.00
Original price $5.00
$5.00
$5.00 - $5.00
Current price $5.00
In-Store Availability
Stock Status: Limited Stock (1-2?) Location: West wall
In-Store Only — Visit us in Gap, PA to purchase

Overview

The PRO-FIT 2-1/2 EG Roofing Nail (132158) is designed for hand-drive roofing applications requiring a durable, corrosion-resistant fastener. Manufactured by National Nail under the PRO-FIT brand, this electrogalvanized steel nail is packaged in a 1 lb unit and sold in a case of 12 such units, providing a practical bulk supply for roofing contractors and installers.

Technical Specifications

MPN 132158
Brand / Manufacturer PRO-FIT / National Nail
Nail Length 2-1/2 in
Head Type Flat
Head Size 7/16 in
Shank Type Round, Smooth
Point Type Diamond
Material Gauge 11 ga
Material Steel, Electrogalvanized (EG)
Approximate Nails per Pound 109
Package Weight 1 lb per unit
Case Weight 3.32 lb
Case Pack 12 × 1 lb units
Case Dimensions (H × W × L) 6.875 in × 5.188 in × 12 in
Category Hardware Fasteners > Nails

Technical Features

  • Electrogalvanized steel construction: The EG coating provides a zinc layer over the steel shank, offering corrosion resistance suited for outdoor roofing environments.
  • 11-gauge shank: A heavier gauge wire provides increased shank strength and holding power when driven through roofing materials.
  • 7/16 in flat head: The wide, flat head design maximizes bearing surface against roofing substrates such as shingles and felt, reducing pull-through.
  • Diamond point tip: Facilitates clean penetration into roofing materials, reducing splitting and allowing consistent hand-drive performance.
  • Round, smooth shank: Allows for straightforward hand-drive installation with a standard roofing hammer without requiring specialized tooling.
  • 2-1/2 in length: Provides sufficient penetration depth for common roofing assemblies including asphalt shingles over sheathing.
  • Approximately 109 nails per pound: Known count-per-pound ratio supports material estimation and job-site planning.

Applications

  • Hand-drive installation of asphalt shingles, roofing felt, and similar roofing materials.
  • Residential and light commercial roofing projects requiring a corrosion-resistant fastener.
  • Repair and re-roofing work where bulk 1 lb unit packaging allows flexible quantity management.
More in Collated Nails & Staples View all 178 →
1-1/2 x 148 PSLD Nail Galv ACQ Jst Hngr 3000 PASLODE1-1/2 x 148 PSLD Nail Galv ACQ Jst Hngr 3000 PASLODE $111.00 primary_image2-3/8" x .113 HOT DIPPED GALVANIZED RING SHANK 30 DEGREE PAPER TAPE COLLATED ROUNDRIVE FRAMING NAILS 2000CT $60.00 Enviromat Pins, 17686 Sod Staples/Pins, 6X1X6 (0)Enviromat Pins, 17686 Sod Staples/Pins, 6X1X6 $8.94 primary_imageSimpson Strong-Tie S13A225SNC 15° Wire Coil, Full Round Head, Ring-Shank Siding Nail — 2-1/4 in. Type 304 (3600-Qty) $163.00 3 1/4 x 131 Nail RS Galv ACQ 2,0003 1/4 x 131 Nail RS Galv ACQ 2,000 $120.00 primary_imageSimpson Strong-Tie S13A175SNC 15° Wire Coil, Full Round Head, Ring-Shank Siding Nail — 1-3/4 in. Type 304 (3600-Qty) $134.00 3 x 131 Nail SM Galv ACQ 2,000 Round Drive3 x 131 Nail SM Galv ACQ 2,000 Round Drive $100.00 1-3/4" EG ROOFING NAIL25# 1321191-3/4" EG ROOFING NAIL25# 132119 $38.00 Staple  1/2"Med Crown,1-1/2",16Ga,GAL 105M PASLODEStaple 1/2"Med Crown,1-1/2",16Ga,GAL 105M PASLODE $92.00 1-1/2" x 7/16  Crown Staple EG 10000/Box1-1/2" x 7/16 Crown Staple EG 10000/Box $56.00 primary_imageDEWALT Finish Nails, 2-1/2-Inch, 16Ga, 20-Degree, 2500-Pack $33.00 primary_imageDEWALT Finish Nails, 20-Degree, 2-Inch, 16Ga, 2500-Pack $30.00 1-1/2 x 148 Nail Brite Joist hange 3000 Paslode1-1/2 x 148 Nail Brite Joist hange 3000 Paslode $77.00 2 3/8 x 113 Ring Shank Nail Brite 5,000 PneuFast2 3/8 x 113 Ring Shank Nail Brite 5,000 PneuFast $70.00 primary_imageSimpson Strong-Tie S16N250FNJ Straight, Adhesive Collation, T-Style Head, 16-Gauge Finishing Nail — 2-1/2 in. Type 304 (2500-Qty) $93.00 primary_imageSimpson Strong-Tie S16N200FNJ Straight, Adhesive Collation, T-Style Head, 16-Gauge Finishing Nail — 2 in. Type 304 (2500-Qty) $76.00 Staple PASLODE 1/2" Med Crown,1-3/4", 16Ga, GAL 9MStaple PASLODE 1/2" Med Crown,1-3/4", 16Ga, GAL 9M $91.00 2" x 18ga Brads Electro Gal 5000/Box2" x 18ga Brads Electro Gal 5000/Box $12.00 primary_imageDEWALT 2-1/2 in. 16 Gauge Straight Finish Nail (2,500 PK) $17.00 primary_imageSimpson Strong-Tie S15N200SFN Tape Collation, DA-Style Angle, 15-Gauge Finishing Nail — 2 in. Type 304 (4000-Qty) $182.00
Document