/Inventory/Equipment & Tool Rental 1,000 + Items. Online Rates/Jacking, Move, Lifting, Climbing Rental (42) Items
Showing 49 - 53 of 53< Previous12345
S  Buckingham Jack Rental, 43^-71^,10 Ton, Post Only
The Buckingham Jacking-Shoring Post extends quickly with pin holes every 4" on center. A rotating collar with pin holes fine-tunes the extension in 1" increments, while a threaded locking collar secures the load in place with infinite adjustment. **Two 5-ton jack cylinders do the lifting, and are extended with a hydraulic hand pump (Rented Separately:HYDRUALIC HAND PUMP ).** Precise lifting and weight readings are achieved by viewing the pressure gauge and using a conversion rate of 1000 lbs of hydraulic pressure = 1 ton of weight. Jacking with the posts can be done in 4" increments by resetting the pin for the next lift. When the desired height is reached and the threaded locking collar is tightened, the jack cylinders may be retracted and removed from the shoring post with the load safely and securely supported in exact position.also known as a pole jack, ceiling jack, screw jack or beam support jack
JACBUC43
Tall Hydraulic Jack Basement Jack, 20 Ton 13 feet max
Jack stand can raise beam 6.5 inches at a time. 6.5 inches is the maximum stroke of the bottle jack. To raise the beam more than 6.5", Shore the beam then reset post to a different height and raise another 6.5 inches.

Use this Tall Hydraulic Jack to raise up sagging floors above basements, in barns, sheds and other remodeling processes. Hydraulic tall jacks are much safer than wooden beams.

JACBAS13
Tall Hydraulic Jack Basement Jack, w/ 20 Ton Jack
Jack stand can raise beam 6.5 inches at a time. 6.5 inches is the maximum stroke of the bottle jack. To raise the beam more than 6.5", Shore the beam then reset post to a different height and raise another 6.5 inches.

Use this Tall Hydraulic Jack to raise up sagging floors above basements, in barns, sheds and other remodeling processes. Hydraulic tall jacks are much safer than wooden beams.

JACBAS
XL  Buckingham Jack, 93^-166^,10 Ton, Post Only
The Buckingham Jacking-Shoring Post extends quickly with pin holes every 4" on center. A rotating collar with pin holes fine-tunes the extension in 1" increments, while a threaded locking collar secures the load in place with infinite adjustment. **Two 5-ton jack cylinders do the lifting, and are extended with a hydraulic hand pump (Rented Separately:HYDRUALIC HAND PUMP ).** Precise lifting and weight readings are achieved by viewing the pressure gauge and using a conversion rate of 1000 lbs of hydraulic pressure = 1 ton of weight. Jacking with the posts can be done in 4" increments by resetting the pin for the next lift. When the desired height is reached and the threaded locking collar is tightened, the jack cylinders may be retracted and removed from the shoring post with the load safely and securely supported in exact position. also known as a pole jack, ceiling jack, screw jack or beam support jack
JACBUC93
Showing 49 - 53 of 53< Previous12345
Back to Top
0